|
|
|
|
CAM-1 is dedicated to providing as much information as possible with regards to the programming of CNC machine tools and CAM software. This page on our website is dedicated to technical information, articles and white papers. If you have an item that you would like to submit for inclusion please feel free to e-mail your request to webmaster@CAM-1.com . Please include a brief biography of the author with each submission. Accurate information is critical in making any informed decision. We at CAM-1 feel that the more informed you are concerning CAD/CAM software and programming the more likely you are to be a potential client of ours. If you are a novice in this field there is no shame in that, but be diligent and study and learn from those who have experience. If you have questions then don't be ashamed to ask them, for how else will you gain the necessary knowledge. If you have questions regarding an article feel free to use the e-mail link provided to the author at the end of each article. For more generalized questions please feel free to address them to info@CAM-1.com .
Agie ProgrammingThis paper provides basic information regarding the programming of Agie wire EDM machines with either the 100/123 or AgieVision controls. If you are not familiar with Agie programming this is a must read. Agie 4-axisThis paper provides specific information regarding both 3D and advanced conics programs for Agie wire EDM machines. A New Productivity ToolThis is the full version of an article that was published in June 2000 issue of Modern Applications News. It discusses the importance of CAD/CAM software in the productivity of wire EDM machines. This is an article on how to select the correct CAD/CAM software for your wire EDM machine. Making the Right Choice for Charmilles This is an article on how to select the correct CAD/CAM software specifically created for Charmilles wire EDM machines. The Secret to EDM Profitability This is an article on how to increase the profitability of your wire EDM equipment. |
|
Send mail to
webmaster@cam-1.com with
questions or comments about this web site.
|
